
many of the users do not consider this important
but actually very important
way is:
give the fan in the back, sides and front
1. back in the bottom of the PSU (the wind blew out and try
not blocked)
2. closed section casing side. strong gust in this section is not good because
carry dust gets into the processor heatsink. should be given a small fan.
and do not lead directly to the processor fan
3. place it on the front of the fan inside the casing but in front of the shelf hard drive. This in addition to
cool the hard drive will also make good air circulation. other than that in section
Optical drive slot gaps do exist. please put the fan in there with
gusts of wind out of the casing. this will reduce the heat in the waste of money
power supply ...
4. do not miss on the motherboard chipset. give the fans in that section to remain
cold
that which I apply on my PC. with normal temperature Processor
37 C s / d 42 C. if want to try to put the cooler in lantai.tapi remember, the casing should be tight and dry (the love of food dryers, usually get if buy drugs or electronic products)
Simak
Baca secara fonetik
No comments:
Post a Comment